Colours
The Bradstone range of reconstructed stone products is designed
to replicate the characteristics of natural stone, where shades are
subtle and subject to slight variations. This is especially
highlighted in the weathered shades where many products are hand
made to ensure a unique shade and colour mix, giving a completely
random, natural look. Colours can appear to change significantly
depending upon the prevailing conditions such as sunlight, heavy
shade or rain, and you are therefore advised to check the colour
and appearance of actual products (preferably in dry conditions in
daylight) before purchase. It is also recommended that, where
possible, products are selected from the same production batch. The
colours represented here are as accurate as modern printing will
allow, but actual colours and appearance of products may vary.
Bradstone products will weather over time in a similar way to
natural stone. Refer to the information opposite on colour
variation in our natural stone ranges.
Application/Suitability
Unless otherwise stated, the Bradstone materials featured on
this website are intended for use for domestic landscape projects.
Bradstone decorative paving is not suitable for driveways unless
otherwise stated. Refer to your stockist or call the Bradstone
Consumer Helpline if you are in any doubt as to the suitability of
any Bradstone product for a given application. The manufacturer
cannot accept any liability where products have been used for any
inappropriate purpose. In the unlikely event of products reaching
you in a less than satisfactory condition, please refer to your
stockist immediately, allowing time for the rejected product to be
replaced. If a complaint is raised after laying the product,
Bradstone cannot accept responsibility for any defect. De-icing
salts should not be used on the Bradstone range of decorative
paving.
Handling
Good manual handling techniques should be adopted when handling
products. Some products in the Bradstone range are heavyor an
awkward shape to lift and it is recommended that suitable lifting
equipment is used for these products. Always wear gloves and safety
footwear when handling product. If product is to be cut always wear
safety goggles and when using a high speed cutter also wear
suitable respiratory protection, such as a dust mask. Before
removing wrapping or banding, ensure that the products are on level
ground or retained in some way to prevent fall over. When removing
shrink wrapping and banding use the appropriate cutting tools ;
also it is recommended that safety goggles are worn. Product should
always be handled with care as breakages, chipping and other damage
may result from mishandling. Minor scuffing can occur due to
movement in transit and will generally disappear in time. If in
doubt do not lay and consult your stockist.
Cost
Bradstone regrets it is not able to quote recommended retail
prices as these are set by its stockists and may be subject to
variation. Your local stockist will provide full details of prices
in your area. It is worth noting that the cost of paving or walling
is rarely the major proportion of a typical garden landscaping
budget, particularly if employing a professional landscaper or
builder.
Sizes & Joint Widths
All dimensions quoted on this web site are nominal and are for
guidance only. Actual sizes will vary, particularly on the products
designed to replicate natural stone which have features such as
riven profiles and fettled edges. Where space is critical,
Bradstone recommends dry laying the product to check area required
(especially circles and patio feature kits). The sizes and
quantities given in the colours and sizes tables usually allow a
nominal 10-15 mm joint width. When laying random paving and
circles, and in particular Wetherdale and Old Town with their
fettled edges, joint widths will depend on the paving type and
laying pattern chosen and will be variable – from approximately
10mm to 30mm.
Efflorescence
Bradstone cannot accept responsibility for the effect of
“efflorescence” which can be a characteristic of all good quality
products with a high cement content. The phenomenon may be
exhibited by an apparent loss of intensity of colour and the
appearance of a milky white bloom on the face of the product. The
effect generally disappears with time and is in no way detrimental
to the performance of the product.
Bradstone reserves the right to alter specifications without
notice. All the products or services shown on this web site are
supplied subject to Aggregate Industries UK Ltd Terms and
Conditions of Sale.